Creating a bootable flash drive

To create a bootable USB flash drive, you will need a laptop, a USB flash drive of at least 4 GB, an operating system image (available at the link below), and the rufus program (available at the link below).

1. Connect a USB flash drive to a free USB port on your laptop.

2. Download the operating system image https://disk.yandex.ru/d/n-Y1_CS2Cfb9Dg

3. Download the rufus program https://disk.yandex.ru/d/X1t8wc4KqVYHfQ

4. Unpack the archive with the rufus program If you have winrar

If 7zip

5. Run the rufus program that you unpacked

6. Here we see your flash drive (if there is a choice of other USB flash drives, disconnect them from the laptop and leave only the clean one that you bought)

7. Select the image of the operating system that you downloaded in step 2.

8. Don't change anything else just click START

9. On the question that all data will be erased, click ok.

10. We are waiting for the installation to finish until this window appears

The flash drive is ready, disconnect it from the PC!